• Home
• Compare Amplifier Prices
• Retailers
• Shop By Brand
• Special Offers

SpeakerCraft BB1235 Power Amplifier

The purpose of a power amplifier is to take in a weak signal from a source device and make it suitable enough to drive a loud speaker. The output signal will be strengthened by the amplifier. SpeakerCraft BB1235 Power Amplifier is a power amplifier with 12 channels. These amplifiers find application in all kinds of electronic devices designed to perform any number of actions.

This new power amplifier from SpeakerCraft has an RMS power output of 35 Watts per channel. It also has independent level controls for each channel. Each channel can be assigned to a common left, common right or mono of the bus, auxiliary inputs or its own dedicated input. The system has a remote power-on switching via signal sensing or 3 – 30 Volt AC/DC trigger. It has a 12 V control output for switching auxiliary devices on and off. This amplifier is bridgeable as well. The pass through output of the system allows daisy chaining of multiple amplifiers. This amplifier has separate protection circuitry for each channel pair.

SpeakerCraft BB1235 12-Channel Power Amplifier has 5 way binding posts. It has a height of 160 mm, a width of 430 mm and a depth of 442 mm. The overall weight of this amplifier is 55 lbs. The total harmonic distortion produced by this device is 0.05%.

Pyramid PA 205 Amplifier

An amplifier takes in a weak signal and makes it strong enough to drive a loud speaker or to enhance the sound effects from your music system or home theatre system. Pyramid PA 205 Amplifier is an amplifier in a black colour enclosure with mono sound output mode.

Pyramid PA 205 has a ¼ inch phone jack and an LED level display. This amplifier has an additional volume control feature. This Pyramid amplifier has master volume control, tone control and Phono / Aux volume control. It has volume controls for Mic1 and Mic 2 and has 6.35 mm connectors for Mic 1 & Mic 2. The connectors of this amplifier are Audio line-in (XLR), System components control bus, Speakers output, Microphone (phone mono 6.25 mm), Audio line-in (RCA phono) and Audio line-out. It has a removable AC cord and DC 12 V inlet. This amplifier comes with 4, 8, 16 and 70 V speaker outlets and mix bus jacks. The system has 40 Watt mono RMS.

Pyramid PA 205 Mono Amplifier has an integrated power supply. It requires a voltage of AC 110 / 220 V and has an AC power outlet. The total output power of this amplifier is 120 Watts. The dimensions of this amplifier are 3.3 cm x 12.75 cm x 9 cm and it has a weight of 3.92 kg. The total harmonic distortion produced by this amplifier is 0.05 %.

NAD C375 Amplifier

Turn up the sound with NAD C375 Amplifier. This amplifier offers high power sound output for your music players. It has an output power of 150 watts per channel and an impedance of 8 ohms. The system has two channels and has NAD SR 8 full system remote control for easy manipulation.

This NAD amplifier offers 200W, 365W, 500W IHF Dynamic power into 8, 4 and 2 ohms, respectively. It has PowerDrive circuit. This amplifier has a headphone socket and front panel Media Player input for attaching portable MP3 player. The device has relay input switching and Holmgren toroidal power transformer. There are 7 line inputs including two tape in/outs. There is a main amp input and 2 preamp outputs too. This amplifier has ‘A’ class voltage stages, distortion cancelling circuit, tone controls defeat switch and BEE Anti-saturation clamp. It has a short signal path from input to output. It also has speaker A + B outputs and switching and Soft Clipping™ to reduce distortion at high levels when amp is pushed to limits and protects speakers from damaging. All sockets of the system are gold plated.

NAD C375 150 Watts Amplifier has IR input and output, 12 volt trigger output and RS 232 serial port. This amplifier has optional PP375 MC/ MM phono module. It has detachable IEC power cable. The device has a size of 43.5 cm x 39.6 cm x 15cm and has a weight of 15.3 Kg. It has a standby power consumption of 1 watt. The signal-to-noise ratio of the system is 102 dB. This amplifier is free of lead and other environmentally dangerous substances.

Lexicon LX7 Amplifier

Lexicon LX7 Amplifier is a perfect amplifier that helps to give a high power sound output. With this amplifier you can give power to your music system for creating a party environment. This amplifier has a power output of 200 Watts per channel at 8 ohm impedance. Four hand-graded, custom output transistors are provided per channel. This amplifier supports 7 channels and has THX Ultra certification as well.

This Lexicon amplifier has a bridgeable architecture for producing higher output of 400 Watts per channel. It has oversized toroidal power transformer with extraordinarily low DC resistance and thermal protection. This amplifier offers high power supply for extra headroom at the outputs. It has Junction temperature simulation (JTS) to provide maximum performance from the output transistors. The device has thermal protection from overheating, loudspeaker protection from DC and frequencies below 10 Hz, protection against short-circuits, device failures, miswiring and internal faults. The system remains stable with mismatched, reactive or unusual loads. It has a quiet microprocessor controlled forced air cooling to minimise chassis size.

Lexicon LX7 7 Channel Amplifier is compatible with 2 Ohm loudspeaker impedances. It has a trigger output for power control from an external device. In addition, there are RCA, XLR, tip/ring/sleeve inputs. The system has heavy duty gold plated 4 way terminals. This amplifier is provided with multi-colour channel status LEDs. The frequency response of the system is 20 Hz-20000Hz and has a total harmonic distortion of 0.02%. The signal to noise ratio of this amplifier is 111dB. The dimensions of this amplifier are 44 cm x 48.3 cm x 14.4 cm and it has a weight of 25.37 Kg. The manufacturer offers a warranty of one year for this amplifier.

Exposure 2010S Power Amplifier

The Exposure 2010S Power Amplifier is a very powerful model that will enhance the sound of your system like never before successfully bringing out every minute detail in your brand of music. Besides, it is very compact in size and shape occupying very little space. It measures 90 mm in height, 440 mm in width and 310 mm in depth. Available in Black or Titanium colours, this device weighs only 7 kgs.

This smart sound amplifier consists of a high capacity 200 VA custom made Torodial power transformer and power supply capacitors. This device lets its performance do all the talking delivering a total stereo output of 150 watts that can really blow your roofs away. Further, the improved aluminium casework and extruded front panel controls resonance and stray magnetic fields.

The stylish Exposure 2010S Amplifier uses high quality capacitors in the signal path. Besides it ensures clean and extended low frequency performance. This diligent device is bi-wiring compatible and allows switching to mono block mode to ensure doubling output current for low impedance loads. It is provided with 1 V gain +24 dB input sensitivity and 10 kOhms input impedance. The frequency response is 20 Hz to 20 kHz +/- 0.5 dB, THD is <0.02% and the signal to noise ratio is >110 dB.

This reliable power amplifier delivers excellent audio clarity with amazing effects giving you total excitement and satisfaction. This sleek amplifier requires a power supply of 110 to 120 V or 200 to 240 V with 50/60 Hz frequency. It consumes 200 VA. The company provides 3 years warranty for the device.

Editor's Picks

FATMAN ITUBE VALVEDOCK

£176.25

YAMAHA DSP-Z7

£1395.00

Yamaha DSP-AX757SE

£369.00

Yamaha A-S2000 Amplifier

£1482.99

• Recent Posts

  • Lanzar VIBE276 Amplifier
  • Infinity Reference 611A Amplifier
  • Power Acoustik OVN4-840 Amplifier
  • Power Acoustik OVN2-1800 Amplifier
  • Pyramid PB481X Amplifier

• Contact us
• About us
• Resources
• Special Offers