A car amplifier is used to power the audio device of your car. This new Blaupunkt GTA 260 Car Amplifier blasts out 400 Watts of purest sound in your car to really hit the road to music. It is an analogue amplifier and comes with 2 channels. It also comes with permanent supply and ignition supply inputs.
The 2 loud speakers of this amplifier have screw type connection. The system has silver coated connectors and the maximum cable diameter of the loud speaker is 6 mm². This amplifier has a maximum power of 2 x 120 Watts for 2 channels at 4 Ohms, 1 x 400 Watts for 1 channel at 4 Ohms and 2 x 180 Watts for 2 channels at 2 Ohms. The amplifier has an RMS power of 2 x 60 for 2 channels at 4 Ohms, 1 x 180 Watts for 1 channel at 4 Ohms and 2 x 90 Watts for 2 channels at 2 Ohms. The high pass filter cross over frequency of this amplifier is 80 Hz and the high pass filter edge steepness is 12 dB/Octave. The system has a low-pass filter cross over frequency of 50-250 Hz and a low pass filter edge steepness of 12 dB/Octave. It has a Bass boost setting range of 0 – 12 dB. It also has an LED for protect mode.
The total harmonic distortion of the Blaupunkt GTA 260 Amplifier at nominal power is 0.05 %. The attenuation factor at 4 Ohm is 100 and it has a stability of 2 Ohms at normal mode. The signal to noise ratio of this amplifier is 90 dB. It has a frequency response of 10-30000 Hz. The input impedance of the system is 10 k Ohm and the input sensitivity is 1-8 V. This amplifier has dimensions of 52 mm x 197 mm x 296 mm.
| General Information | |
|---|---|
| Brand | Blaupunkt |
| Model | Blaupunkt GTA 260 Car Amplifier |
| Dimensions | 52 mm x 197 mm x 296 mm |
| Type of Amplifier | Analogue Amplifier |
| Impedance in ohms | 10 kOhm |
| Total Harmonic distortion | 0.05% |
| Wattage | 400 Watts |
| Signal to noise ratio | 90 dB |
| Number of Channels | 2 |
Related posts: