Listening to music while travelling make driving less tiresome and more
enjoyable and for quality music JBL GTO-301.1 Car Amplifier is the right product. The manufacturers are JBL whose sole concern is consumer satisfaction and providing quality music.
Product Specifications:
A channel at 4 ohms and 1% THD + N with 200 watts RMS and another at 2 ohms & 14.4V supply and ? 1% THD + N with 294 watts RMS are the key features of this product. The Signal-to-Noise Ratio of JBL GTO-301.1 Amplifier is 77 dBA (reference 1 watt into 4 ohms). It has a dynamic power of 320 watts at 2 ohms. It has an Effective Damping Factor of 6.39 at 4 ohms whereas the responsive frequency is 10Hz – 302Hz.
The maximum input signal of this amplifier is 4.7V while the maximum sensitivity is 220mV. Its output regulation is .098 dB at 4 ohms. The dimensions (W x H x D) of this amplifier is 11-5/8″ x 12-5/16″ x 2-3/8″. It has a 12dB per octave electronic crossover and a Full-range preamp outputs which gives you the facility to use multiple amplifiers. An Optional remote level bass control and a variable bass boost circuit are the other features added. The amplifier is mono channel unit. The THD at Rated RMS Power is 1 %.
The input voltage is 14.4 volt and the facility for MOSFET Circuitry for plenty of power, even at low-impedance loads is supported. Variable low-pass crossover, high and low-level inputs, full-range preamp outputs are some other features included. The hard disc of this car amplifier has a capacity of 2GB. With 2 numbers of discs and 1 output channel the maximum wattage of this product is 204 watts.
| General Information | |
|---|---|
| Brand | JBL |
| Model | GTO-301.1 |
| Dimensions | 11-5/8″ x 12-5/16″ x 2-3/8″ |
| Type of Amplifier | Car amplifier |
| Total Harmonic distortion in percentage | 1% |
| Wattage | 204W |
| Signal to noise ratio | 77 dBA |
| Sound System | Stereo |
| HDMI Interface | No |
| USB Interface | No |
| Number of Channels | Mono |
Related posts:
