Alpine PDX-4.150 Car Amplifier
February 19, 2010
Alpine introduces the new Alpine PDX-4.150 Car Amplifier which is a quality product. This elegant amplifier is capable to
power audio with tremendous power and quality. Released in January 2006, the multi channel amplifier is the ideal product you were looking for. It can easily be installed into your car. Dimensions of the device are 10.13 x 7.56 x 2.44 inch and it weighs 6.9 lbs. It offers MOSFET Circuitry.
The classy amplifier offers maximum of 150 W x 4 output at 4 Ohms. With total peak power of 600 Watts, it gives stunning sound experience. The amplifier offers 4 channels which facilitate intensive audio entertainment. The frequency response is 20 Hz - 20000 Hz. The signal to ratio is 100 dB.
The Alpine PDX-4.150 4 Channels Car Amplifier offers Thermal Management Processor, Adjustable Crossover, DC-DC PWM Power Supply, STAR Circuitry, Auto Over-Current Protection, Continuously Adjustable Gain Control, Gold Plated Power Screw Terminals, 4-Layer Glass Epoxy PC Board and Speaker Quick Connect facilities. Company provides maximum warranty of 1 year.
| General Information | |
|---|---|
| Brand | Alpine |
| Model | Alpine PDX-4.150 Car Amplifier |
| Weight | 6.9 lbs |
| Dimensions | 10.13 x 7.56 x 2.44 inches |
| Type of Amplifier | Multi channel Car Amplifier |
| Impedance in ohms | 4 Ohms |
| Wattage | 600 Watts |
| Signal to noise ratio | 100 dB |
| Number of Channels | 4 |
| Warranty | 1 year |
Alpine MRP-M500 Amplifier
December 21, 2009
The elegant black Alpine MRP-M500 Amplifier enhances the sound of 
your music system bringing out every minute detail and rich effects. The power required for its operation is 14.4 V DC (11V to 16V). The input sensitivity is 0.2 to 4.0 V while the frequency response is 20 to 200 Hz. Further, the maximum impedance is 4 ohms and the signal to noise ratio is 100 dBA.
This smart black amplifier comes in very compact size. The foot print measures 270 mm in width, 60 mm in height and 242 mm in depth. The height sink measures 210 mm in width, 60 mm in height and 242 mm in depth. Further, this mono amplifier has a total output power of 1100 watts. It has thermal management control. Further, this diligent amplifier is provided with START circuitry design with dual sided glass Epoxy PX board.
The sleek black Alpine MRP-M500 Mono Amplifier consists of a top mounted blue coloured LED power indicator. It consists of gold plated RCA input connectors and speaker level inputs. It has crossover of 50 Hz to 200 Hz at 24dB /Oct. Besides, it is provided with 15 Hz subsonic filter. Other features include continuously adjustable gain control, adjustable low pass crossover, over current, over voltage and thermal protection. It has an equalizer support too.
| General Information | |
|---|---|
| Brand | Alpine |
| Model | Alpine MRP-M500 Amplifier |
| Dimensions | Foot Print: 270 x 60 x 242 mms Heat Sink: 210 x 60 x 242 mms |
| Impedance in ohms | 4 ohms |
| Total Harmonic distortion | 100 dBA |
| Wattage | 1100 watts |
| Variable crossover | 50 Hz to 200 Hz |
| Number of Channels | Mono |
Alpine PDX-5 Amplifier
October 25, 2009
Alpine PDX-5 Amplifier is a 5 channel car amplifier with stackable installation design and front panel controls. It comes with class ‘D’ amplifier design and has quick-connect speaker connectors. This is a mono channel amplifier and is bridgeable as well.
The unit has RMS wattage of 75 watts x 4 channels and 300 watts x 1 channel at 4 ohms or 2 ohms impedance. For bridged mode, it has RMS wattage of 150 watts x 2 channels and 300 watts x 1 channel at 4 ohms. This car amplifier has MOSFET power and output stages. It has a fuse rating of 30A x 2. 4-gauge power and ground leads are recommended for the system. It has a low pass crossover frequency of 20 Hz – 400 Hz and a high pass frequency crossover of 30 Hz – 200 Hz. The high pass slope and low pass slope of this amplifier is 12 dB/ octave. The system has switch-mode digital topology and low resistance, high current speaker terminals. The system has an LED power indicator and a remote bass knob.
The frequency response of the Alpine PDX-5 Car Amplifier is 20 Hz-20 kHz. The total harmonic distortion produced by this amplifier is 1%. The signal to noise ratio of the system is 77dB. This amplifier has an input voltage of 14.4V and the total output power produced is 1200Watts. It has dimensions of 10.19 x 8.88 x 2.5 inches. The company offers a warranty of 1 year for this car amplifier.
| General Information | |
|---|---|
| Brand | Alpine |
| Model | Alpine PDX-5 Amplifier |
| Dimensions | 10.19 x 8.88 x 2.5 inches |
| Type of Amplifier | Car amplifier |
| Impedance | 2 ohms un-bridged 4 ohms bridged |
| Total Harmonic distortion | 1% |
| Wattage | 1200 Watts |
| Variable crossover | LP: 20 Hz – 400 Hz HP : 30 Hz – 200 Hz. |
| Signal to noise ratio | 77 dB |
| Number of Channels | 5 |
| Warranty | 1 year |
Alpine MRD M1005 1000W Mono Block Amplifier
March 10, 2008
Amplifiers have been dedicatedly designed for enjoying high quality audio amplification. Users have to confirm the maximum audio output power compatibility before buying a new amplifier. Alpine MRD M1005 1000W Mono Block Amplifier is a latest introduction to the UK market from Alpine manufacturing company. The device has been designed to amplify the audio output of your car music system.
Features Explained
• Mono Subwoofer
It is a main component of the device which has the ability to offer 500 watts audio power at 4 Ohms.
• Cooling Fan
This fan is integrated in the amplifier for reducing the heat produced around the music system due to continuous play. Speed settings can be adjusted by users and it has been fixed internally.
• Amp Link
It comes with Amp link which is needed for single cable hook-up.
• Clarity in amplification
Users can enjoy effective audio output with the support of STAR Topology.
• Useful audio features
Alpine MRD M1005 1000W Mono Block Amplifier has come with the ability to offer some essential features like bass engine, low-pass digital filter, sub-sonic filter, EQ etc.
• Bass Compensator
You can make use of this option for enhancing low-end definition.
• Mounting
Users can mount the unit inside the car which will not reduce the quality of audio output.
• Other Features
1. MOSFET power supply and output stages
2. Preamp outputs
3. Phase adjustment 0-180°
4. Turn-on delay
