The new Audiobhan amplifier is a Class D Mono channel Amplifier for car usage. The device produces a maximum output power of 800W at 1 Ohm impedance.

An audio line-in and an audio line-out are the available connector types. The equipment comes in chrome colour with cobalt blue illumination.

Remote Bass Control can be controlled with the featured Blue Backlight Knobs. Thermal protection, overload protection, subsonic filter, bass level remote control, cooling fan, short circuit protection, DC offset protection are the important features of the amplifier.

The Audiobahn A8001DT Mono Amplifier produces 800W at 1 Ohm, 500W at 2 Ohms and 300W at 4 Ohm. The total harmonic distortion of the device is 0.05%.

The amplifier crossover frequency range is 50 – 250 Hz and the crossover slope is 18 dB/octave.

The device has a signal-to-noise ratio of 100dB, response bandwidth of 10 – 20000 Hz, bass boost frequency of 40-100 Hz and a bass boost gain of 0 to +18dB.

The equipment illuminates red to indicate when amplifier is clipping and has a large digital volt-meter display.

Preamp outputs, Dual Cooling Fans, Chrome Flame Cooling Fan Grill covers, Multi-Stranded Toroids Power Supply, Double Sided Glass Epoxy Circuit Board and High gloss chrome plated finish are provided.

The Amplifier has a size of 11.9 in X 13.1 in X 2.5 in. 4-gauge power and ground leads are recommended to be used with the device. A 1 year warranty is being provided for the product.

This dual channel Audiobahn Amplifier provides Output of 200 Watts at 4 Ohms through 2 channels, 280 Watts at 2 Ohms through 2 channels and 560 Watts at 4 Ohms through 1 channel. It supports Connections like Audio line-in (RCA phono x 2), Audio line-out (RCA phono x 2), Speakers output (Screw-type) and DC power input (Screw-type).

Audiobahn A2801T Stereo Amplifier features 100 dB signal-to-noise ratio, 0.02% distortion factor and 45 Hz Crossover bass boost frequency. It supports Active crossover and 18 dB Crossover slope. The low pass frequency range is 30 – 120 Hz while high pass frequency range is 50 – 750 Hz. It also supports Crossover bass boost gain from 0 to +18dB.

Audiobahn A1300HCT Amplifier

Variable bass boost in this amplifier is 0 to 18dB at 40 to100Hz frequency range. The unit supports variable subsonic filter range of 20 to 50Hz and low-pass crossover frequency of 40 to 120 Hz. Signal to noise ratio is 100dB and the total harmonic distortion is 0.05%. Frequency response ranges from 10Hz to 40 kHz.

Audiobahn A1300HCT 2400 Watts Amplifier is provided with MOSFET circuitry. The amplifier is mono channel type. Dimensions of the device are 12 inches in width, 17 inches in depth and 3.69 inches in height. The input sensitivity of the product ranges from 200mV to 8V. The fuse rating is 90 Amperes. The RMS power at 4 ohms is 300 watts and the RMS power at 2 ohms is 600 watts. RMS power at 1 ohm is 1200 watts. The peak power possible is 2400 watts.

This amplifier offers maximum of 800 Watts output power. The bass boost sound effect delivers incredible audio impact. The unit supports crossover low pass frequency of 30 to 120 Hz and the crossover high pass frequency of 50 to 750 Hz. With the signal to noise ratio of 100 dB, you can ensure excellent performance.

The Audiobahn A4002V 800 Watts Amplifier supports features like Cooling fan, Built In Crossovers, Channel Separation, High Level Inputs, subsonic filter, Thermal protection, Overload protection and Short circuit protection. Connectivity is provided through 1 x Audio line-in ( RCA phono x 2 ), 1 x Audio line-out ( RCA phono x 2 ), Speakers input, 1 x Remote Bass control, Speakers output and DC power input. Various other features supported are Variable subsonic filter, Stereo or bridged mono output, Cooling fan with air intake, Built-in digital voltmeter, MOSFET power supply, Tri-way capable and Preamp & speaker-level inputs. Company offers 1 year warranty for service.

AudioBahn A2150HCT Amplifier

This dual channel amplifier offers maximum of 1200 Watts power. Integrated with Crossovers, this amplifier becomes one of the effective amplification devices available in the market. It features High Current Circuitry, PWM MOSFET Power Supply and Double Sided Glass Epoxy Circuit Board. This amplifier offers >100dB S/N Ratio and 10Hz – 40KHz (± 1dB) Frequency Response.

With 4-way Protection Circuitry such as Thermal, Short Circuit, Overload & DC Offset, it assures safe and convenient use. RCA Throughput Connections are the connectivity options featured. Apart from that, it features Audio line-in ( RCA phono x 2 ), Audio line-out ( RCA phono x 2 ), Speakers output ( screw-type ) and DC power input ( screw-type ).

Dual Cooling Fans are available in this device. VU Meters are included and this Indicates Output Response. It features 20Hz to 45Hz Variable Subsonic Filter, 0-18dB Variable Bass Boost and 40Hz-100Hz Variable Bass Boost Frequency. AudioBahn A2150HCT Dual Channel Amplifier measures (H) 3 11/16″ x (W) 12″ x (D) 17″ making it convenient to use and store.