The unit supports an SNR of 107dBA. This 2-Channel Power Amplifier features frequency response of 20Hz-20kHz1dB and -0.5dB 5Hz-65kHz-3dB. It facilitates automatic source switching between 2 low-level stereo inputs. With enhanced options such as Signal sensing “power on” and 12V DC “trigger on” functions, you can manage the functions well.

The power effect of this amplifier is 2 x 50 watts RMS into 8 ohms, 2 x 125 watts into 4 ohms. With bridgeable outputs, the unit facilitates Speaker A/B switching. This bridgeable amplifier strengthens the feeble and weak signals to offer high quality audio performance. For environments which require high quality audio performance, Audio Source AMP102 2-Channel Amplifier is an ideal choice.

Audio Source AMP210 Amplifier

Product summary
This is a 2-Channel power amplifier offering power effect of 2 x 80 watts at 8 ohms, 2 x 125 watts at 4 ohms. A/B speaker switching and bridged mono switch are integrated in this Bridgeable Stereo Power Amplifier. Apart from that, the unit features Signal sensing “power on” and 12V DV “trigger on” which functions to offer greater performance. You can handle the functions well as it comes with Front panel level and balance controls.

It supports line 2 auxiliary inputs as well. This Stereo amplifier supports enhanced options such as Clip, protection and signal present LEDs. This amplifier is Rack mount ready. In addition to all these, the amplifier features rear panel separate left and right master volume, high level input with Line1/Line 2 Selector and 3-15 seconds delay time. Audio Source AMP210 Bridgeable Power Amplifier is offered with full manufacturer’s warranty.

This black amplifier has 2 channels that outputs 2 x 150 Watts of sound at 8 ohms impedance and 2 x 225 watts in 4 ohms. The signal can be stabled down to 1 ohm. Sound can be switched between the speakers with its A/B speaker switching feature and bridged mono switch. It also gets triggered when a 12V DC input is given to the device.

Audio Source AMP310 Black Amplifier has a panel at the front and the balance of sound output can be controlled. The unit also has two slots for auxiliary input. Its faceplate is made of black anodized brushed aluminium. All the features are indicated with LEDs present mainly to indicate the signal that is present. This device can be mounted on any rack

The system has a pair of stereo inputs with priority override. A/B speaker selector allows multi-room amplification. This amplifier is bridgeable for monaural use. It has signal-sensing Auto power on/off feature, A, B, A+B speaker switch and Mono/stereo switch. It has a power output of 50 Watts RMS for 2 channels and 100 Watts RMS for 1 channel into 8-Ohm speakers from 20-20000Hz with 0.2% THD. This amplifier provides 150 Watts RMS bridged mono power. The input sensitivity of the system is 1.5 Vrms. The system has 400 Watts un-switched AC 117 V outlet. There are 2 Audio line-in ( RCA phono x 2 ) – Rear, one Audio line-out ( RCA phono x 2 ) – Rear and 4 Speakers output ( Banana/spade x 2 ) – Rear.

AudioSource Amp 100 Power Amplifier has a signal to noise ratio of 107dBA, frequency response of 20 Hz – 20 kHz and a total harmonic distortion of 0.02%. The power required is AC 120V at 60 Hz and the power consumed by the system is 500 Watts. It has a dimension of 2.8 x 16.5 x 8 inches and a weight of 7.9 lbs. This amplifier has a warranty of 2 years offered by the manufacturer