It offers Regulated power supply to all voltage gain stages making it more efficient. With Gold plated input and output connectors, the unit encourages enhanced connectivity options. The unit consists of Switchable balanced XLR-1/4 inch and RCA unbalanced inputs. Silver Faceplate is made available. This Solid-state stereo power amplifier offers power packed performance with a power of 120W continuous into 8 ohms (20.8dBW), 200Wpc continuous into 4 ohms (20dBW); 400W continuous into 8 ohms in bridged mode (26dBW).

It has low distortion rate of 0.007% at 120W, 20Hz-20 kHz, IM (60 Hz + 7 kHz, 4:1, SMPTE method). The SNR is rated as 106dB ref. rated output, 90dB IHF. The Slew rate: >60V/µs and Damping factor is >500 at 20Hz ref. 8 ohms, equivalent to an output impedance of 0.016 ohms. Input sensitivity is 1V for 120Wpc into 8 ohms; 2V for full output, balanced and the Input impedance is 50k ohms unbalanced, 20k ohms balanced. Bryston 3BST power Amplifier is built with dimensions of 19 x 5.25 x 9 inches and weighs 22lbs.

This powerful Bryston amplifier offers enhanced amplification, whereby, the feeble sound signals are strengthened in an effective way. Get the real sound performance with 2 x 142 watts (8 ohms) stereo output and 5 x 142 watts (8 ohms), 5 x 215 watts (4 ohms) 5 Channel Dolby Digital output. This amplifier has 81dB (A) SNR for PCM-Stereo, Dolby Digital, Front and Dolby Digital, Surround. Besides these, it has 82dB (A) SNR for Dolby Digital, Centre.

The distortion PCM-Stereo is 0.0090%, distortion DD Front is 0.0097% and distortion DTS Front is 0.0091%. Crosstalk DD, Front-Front is 69dB and the Crosstalk DD, Front-Centre and Crosstalk DD, Front-Rear is 89dB. Bryston 9BST Stereo Amplifier has its damping factor rated as 113 (8 ohms). This unit manages power well consuming 3.7 watts on stand by mode and 275 watts at 5 x 1 watt on operation mode.

The new Bryston amplifier has the latest SST output devices and has an increased power supply capacitance of 30,000 MFD for each channel. The Bryston amplifier produces a high output power of 100 Watts per channel into 8 Ohms, 180 Watts power per channel into 4Ohms and 350 Watts bridged 8 Ohms. This stereo amplifier is provided with selectable balanced or unbalanced inputs. The noise and distortion generated by the Bryston 2B-SST amplifier is comparatively lower. It has selectable 1 Volt or 2 Volt gain. It also has two independent and ultra low noise power transformers.

Bryston 2B-SST-Pro Stereo Amplifier has a quick connect remote with 12V trigger. This Bryston amplifier is available in black and silver enclosure colour with 19 inch/17 inch faceplate. This device is provided with a warranty of 20 years by the manufacturer.

Connect the speakers of your audio or video system to the new Bryston 2B-SST-Pro Amplifier and entertain yourselves and others with the high quality and powerful exploding sound produced from it.

Bryston 7BST Amplifier

Distortion supported is less than 0.007% from 20 Hz to 20 kHz at 500 watts. The slewing rate is greater than 60 volts per microsecond, parallel and Greater than 120 volts per microsecond, bridged. Series/parallel switch is the enhanced feature supported in this device. This unit supports Massive heat sink and ensures Regulated power supply to all voltage gain stages. Gold plated input and output connectors facilitated, increase its durability. Switchable balanced XLR and RCA unbalanced inputs are provided.

Bryston 7BST Mono Amplifier has measurements of 8.25 x 13.33 x 39.4 cm and weighs 42 lbs. It is offered with 20 years parts and labour warranty and you can access the unit without any worries. Unlike other amplifiers, this device ensures unhindered performance and you can rely on this product completely. This product is available at cost effective price and hence can be easily afforded.

Having acquired polarity switch on each channels it will exceed all other products of its kind. Other impressive features include remote 12 Volt power trigger input with delayed output feature and selectable gain settings. Optional 17″ Faceplate (no handles) or 19 inch rack mount (with handles) available in this amplifier. You can own it in optional Silver or Black Faceplate.

The gain select and sensitivity of this machine are 29dB – 1.3Vin = 150W @ 8 Ohms (1V Position) and 23dB – 2.3Vin = 150W @ 8 Ohms – (2V Position). Distortion IM or THD+noise is only <0.005% from 20Hz to 20 kHz at 150 watts into 8W and <0.007% from 20Hz to 20 kHz at 250 watts into 4W.

Noise measured with input shortened – 20Hz to 20 kHz are 110dB below rated output 29dB gain (-75dBu) and 113dB below rated output 23dB gain (-78dBu). The slew rate is >60 volts per microsecond. Its power bandwidth is <1 Hz to over 100 kHz. Damping Factor over 500 at 20 Hz is ref. 8 ohms.

Power output
The power output of this amplifier is 150 watts per channel into 8 ohms and 250 watts per channel into 4 ohms.

Power consumption and Heat load
When the machine is at idle mode it consumes 127 watts. Maximum heat dissipation is only 433 Btu/Hr. The power consumption for 2 channels @ 150W @ 8 Ohms is 668 Watts and the heat dissipation is 1255 Btu/Hr. It consumes power of 1096 watts for 2 channels @ 250W @ 4 ohms and the max. Heat dissipation is 2033 Btu/Hr. The power consumption for Bridged @ 450W @ 8 ohms is 1053 Watts and the max. Heat dissipation is 2057 Btu/Hr.

No one can find such features of excellent standard in any other amplifiers. Only Bryston 3B SST 250Watt Amplifier has the power and technology to move you.