Creek OBH21 Amplifier
September 25, 2009
Creek OBH21 Amplifier is a headphone amplifier which maintains all the parameters of highest quality standards set for amplifiers. With bold styling and unbeatable performance, it is clearly one of the best amplifiers in the market. The style quotient of the product is manifested in the form of its brushed silver front panel and compact structure. It is designed exclusively to insert two headphones of low to medium impedance from single source.
By means of a high quality volume control located on the front panel, the output level is regulated. It offers an output power of >10 mW into 30 to 300 ohms loads.
This Creek amplifier supports impedance of 30 to 300 Ohms and has Total Harmonic Distortion of <0.01% at 1 kHz. Signal to Noise Ratio is rated as >70dB and it consumes power of <4VA. The power required by this device is 24V DC 150 mA. This integrated amplifier offers stereo sound which further adds to the quality of sound.
It features Nickel input sockets and the unit makes use of AC signal coupling. This amplifier comes complete with 24V un-regulated power supply. It consists of 16mm Carbon film volume pot and NE5532 Amplifier circuitry. Creek OBH21 Headphone Amplifier is built with measurements of 180 x 100 x 65mms and it weighs 670gms only.
| General information | |
|---|---|
| Brand | Creek |
| Model | Creek OBH21 Amplifier |
| Weight | 670 gms |
| Dimensions | 180 mm x 100 mm x 65 mm |
| Type of Amplifier | Headphone amplifier |
| Impedance in ohms | 30 to 300 Ohms |
| Total Harmonic distortion | 0.01% |
| Wattage | >10 mW |
| Signal to noise ratio | >70dB |
| Sound System | Stereo |
Creek A50IR Amplifier
September 15, 2009
Creek A50IR Amplifier, with its advanced technology takes amplification to a higher level of experience. This compact sized device gives you the freedom to handle it to your convenience. It is equipped with easy to access controls which facilitate better management of the functions. This Creek amplifier comes in a stylish casing, giving the unit a distinctive look. The unit is budget friendly yet caters to your rising amplification needs.
Easy and better connections are made possible with CD, tuner, video, tape in, power amp in, aux in and Tape, pre amp output and L & R speaker outputs. Power packed performance is made possible with a power effect of 2 x 50 RMS Watts at 8 ohms. Output power is rated as 60W into 4 ohms when it comes to single channel.
Creek A50IR Silver Amplifier is a silver coloured unit and comes with dimensions of (width) 430 x (height) 65 x (depth) 250cm. It is relatively lighter than any of the available amplifiers, weighing just 6kg. Remote control handset is provided along with this unit. Enhanced sound performance is offered with its advanced circuit design and robust casework. Make the most from this well crafted and technically improved amplifier.
| General Information | |
|---|---|
| Brand | Creek |
| Model | Creek A50IR Amplifier |
| Weight | 6kg |
| Dimensions | 430 x 65 x 250 |
| Output power | 2 x 50 RMS Watts at 8 ohms. and 60W into 4 ohms ( one channel) |
| Number of Channels | 2 |
Creek OBH-15 Amplifier
September 7, 2009
For unrivalled amplification, you will have to rely on an efficient amplifier, one like Creek OBH-15 Amplifier. With various enhanced options and personalized settings, you could handle this power amplifier effectively. Built with advanced engineering, you get unhindered amplification. This brawny amplifier is optimised to meet the demanding amplification needs of the user.
Stereo is the sound output mode which enhances the audio performance of this device. All the functions can be controlled with the provided remote control. This power amplifier is loaded with phono stage options, which most of the other amplifiers are deprived of. The unit supports a frequency response of 20 Hz to 20 kHz ± 0.25 dB, R1AA and offers an output impedance of 100 Ohms. Besides that, it offers an impressive moving magnet gain of 37dB, SNR of -83dB, THD of < 0.03% and overload margin of 22dB. The moving coil gain is 56dB, while its Signal to Noise Ratio is -75dB, THD is < 0.05% and overload margin is 20dB.
It comprises of 2 pairs of RCA/phono input socket, exclusively to connect two turntables. The outputs available are 2 x RCA/phono sockets. On the rear panel, it features moving magnet or moving coil switch. Creek OBH-15 Power Amplifier comes with measurements of width 100 x height 65 x depth 150mm and weighs 3 kg. It is available in silver metal fascia and black metal case, giving it an elegant appearance. The unit is included with external 24 volt power supply.
| General Information | |
|---|---|
| Brand | Creek |
| Model | Creek OBH-15 Amplifier |
| Weight | 3 kg |
| Dimensions | Width 100 x Height 65 x Depth 150mm |
| Type of Amplifier | Power |
| Output Impedance | 100 Ohms |
| Total Harmonic distortion | Moving magnet-< 0.03% Moving coil-< 0.05% |
| Signal to noise ratio | Moving Magnet: -83dB, Moving Coil: -75dB |
| Sound System | Stereo |
Creek OBH22 Pre Amplifier
August 26, 2009
The all new compact yet powerful Creek OBH22 Pre Amplifier is capable of amplifying the week audio signals to deliver an outstanding auditory performance. This amplifier has a silver front panel with a black box at the back. It has a unique design with dimensions of 100 mm width, 65 mm height and 150 mm depth. Unlike other heavy amplifiers, this device is light with a weight of about 6.1kg.
The input connections facilitated in this high performance device include 3 x stereo line inputs. It has an input impedance of less than 20k Ohms. This unit is a passive pre amplifier which is capable of controlling your Hi-Fi, at the same time ensuring disturbance-free and noiseless operation.
The output connections of Creek OBH22 Stereo Pre Amplifier include 2 x pre out (each 2 x RCA/phono) (one fixed, one variable). The output impedance of the unit is 0 - 20k Ohms. It exhibits a separation of >80dB @ 1 kHz. With an attenuation of 0 - 90dB, the unit has a relay muting factor of up to >90dB. With the provided volume control (motorized), it has LED’s, which indicate the controller mode and status, on the front panel for convenience.
This Creek amplifier comes with an infra-red remote control with batteries which enables input selection as well as volume adjustment to your Hi-Fi system. It requires an external power supply of 24 volts to deliver the quality performance ensured.
| General Information | |
|---|---|
| Brand | Creek |
| Model | Creek OBH22 Pre Amplifier |
| Weight | 6.1kg |
| Dimensions | 100 mm width, 65 mm height and 150 mm depth |
| Type of Amplifier | Passive Pre-amplifier |
| Input Impedance | <20k Ohms |
| Sound System | Stereo |
Creek OBH-18 Amplifier
July 5, 2009
Creek OBH-18 Amplifier is known for its high amplification results and unimpeded performance. Unlike other amplifiers, this device is destined to be used for longer time period. With its cutting edge technology and comprehensive features, you get to reap maximum out of this device. It is compactly built, where by, you can conveniently store the device and use it in an effective manner.
This Creek Amplifier supports a Gain of 37 dB and the Frequency Response is calculated as 20 Hz to 20 kHz ± 0.25 dB. SNR is 83 dB and THD rate is < 0.03%. It offers an output effect of 250 mV and the Output Impedance is calculated as 100 Ohm. Input sensitivity is 3.5 mV/ 47K ohm/ 220pF and has R1AA deviation ± 0.5%. The overload margin is 25 dB. Power supplied is 24V DC / 30mA voltage. The unit works well with 2.5mV - 5mV output cartridges.
Creek OBH-18 Silver Amplifier comes with dimensions of (L) 150 x (W) 100 x (H) 66mm and weighs 3Kg. It is available in silver enclosure which offers a distinctive appearance. It consists of a discrete class ‘A’ gain stage and features internal voltage regulation. The unit comes with Gold Plated RCA’s, Metal Film Resistors, Star Grounding and External Power Pak, all of which makes the unit a superior device. The unit is offered with 1 year warranty.
| General Information | |
|---|---|
| Brand | Creek |
| Model | Creek OBH-18 Amplifier |
| Weight | 3Kg |
| Dimensions | (L) 150 x (W) 100 x (H) 66mm |
| Type of Amplifier | Moving magnet phono pre-amplifier |
| Output Impedance | 100 Ohm. |
| Total Harmonic distortion | < 0.03%. |
| Signal to noise ratio | 83 dB |
| Warranty | 1 year |
