• Home

JBL GTO-601.1 Amplifier

JBL, the very prominent company has a bright history in producing high quality equipments and the new JBL GTO-601.1 Amplifier is one of their new products. The innovative design of the unit makes it very attractive.

Main Features
JBL GTO-601.1 Mono Amplifier comes with a single output channel. Output power of this new product is 424W at 4 ohms. Product comes with a variable low-pass filter in it. Fuse rating of the system is 30A x 2. This amplifier comes with an optional internal neon lightening. This JBL amplifier has variable cross over and variable boost function. Frequency response of the amplifier is 10Hz - 302Hz. This unit has a protection against the overload and makes it a highly durable one.

Maximum input signal of the product is 5.3V and the maximum sensitivity is 210mV. The effective damping factor of the unit is 6.326 at 4 ohms. This mono amplifier comes with dimensions of (W) 313 x (H) 384 x (D) 60mm.Signal to noise ratio of the device is 72dB.

JBL GTO-752 220 Watt 2 Channel Amplifier

Amplifiers enable strengthening the sound signals and making it audible. We have seen a wide variety of amplifiers ranging from belt amplifiers, home theatre amplifiers and standard amplifiers. JBL has introduced JBL GTO-752 220 Watt 2 Channel Amplifier exclusive for car audio systems. It offers effective deliverance of power and better clarity. It is equipped with durable parts and components that help in attaining qualitative output for longer duration. With a dimension of (L) 12-1/4" x (W) 10-3/8" x (H) 2-1/8" and it can be stored compactly even in small cars. Case aluminium is the head sink feature that enhances the durability of the product.
   
Further to the product
With this JBL amplifier you will not have to depend upon Y-adaptors or signal splitters as the unit is equipped with a set of RCA output preamplifiers. The main objective of this unit is to increase the output level of your car audio system and this job is done perfectly by this unit. Power packed performance is ensured with 75W RMS x 2 x channels at 4 ohms and 110W RMS x 2 Channels at 2 Ohms. The signal to sound ratio is calculated as 108 dBA and THD as 0.07% rated at 4 ohms.

The frequency response is 10Hz – 100 kHz (-3dB). The tune based equalizer accompanies the system during the process of playing whereby the signals are given extra effects. Provision of LED power and protection indicators warns you and guides you from the beginning to the end. Details of the variable high and low filters are 32-320 Hz of 12 dB octave. For the installation process it requires an 8 gauge power and ground wiring. Fuse rating of the unit is 30A x 1.

Integrated units such as variable electronic crossovers and variable bass boost are available in this car amplifier. With the provision of direct connect terminals connectivity seen much easier. The unit supports two discs. Wattage required for the functioning of the unit is 145 and 290 Watt. Manufacturer offers 1 year warranty on purchase of this unit. JBL GTO-752 Car Amplifier is an essential pick for your car.

JBL BPX2200.1 Amplifier

JBL BPX2200.1 Amplifier, best known for its wide range of volume selection and smooth sound technology is the most happening thing in market. JBL, the manufacturers of car amplifiers has thought of only one aspect while making this product, consumer satisfaction.

Product Specifications
The 1-channel type JBL Amplifier has a frequency of 20 - 320 Hz. It is equipped with a high-efficiency switching power supply and “Direct Connect" terminal block power connectors which allow both 8 gauges as well as 4 gauge power wire. The die-cast aluminium heat sink provides a Plexiglas viewing window. It has a mono channel with a RMS power of 1100W at 2ohms. The Signal to Noise Ratio of this product is 93dB.

The dimensions of this JBL BPX2200.1 Car Amplifier are (Height) 31.1 cm x (Width) 54.9 cm x (Depth) 6.5 cm. The THD at rated RMS power is 0.5%. This amplifier has a High-Efficiency Switching Power Supply as well as a Current Servo Circuitry with Crown Technology. Other feature included is the presence of Series or Parallel Bridge for Full Power into 4-Ohm or 1-Ohm Loads. Its Variable Low-Pass Crossover is (32-320 Hz) whereas the Selectable Crossover Slope is (12 / 24 dB). A  Dynamic Bass Optimization (DBO) Subsonic Filter, Preamp Outputs and Remote Level Control are other appreciable features.

JBL A6000GTi Amplifier

For ensured quality sound performance get JBL A6000GTi Amplifier. The high efficiency device delivers clear and pure sound output.

Details: The mono channel amplifier has THD at Rated RMS Power 0.2%. RMS power at 4 Ohms is 6000W. It draws very less current from your vehicle’s electrical system. With astounding features this device has signal to Noise ratio as 90 dB. Frequency response lies between 20 Hz and 400 Hz. Low – Pass Frequency is between 32 Hz and 320 Hz.

Specialities: The Crossover with selectable slope is an interesting speciality of this car amplifier. Variable phase control is possible as well. Preamp outputs and differential inputs provide better convenience to the user. Interfaces with Direct connect is another peculiarity of JBL A6000GTi Mono Channel Amplifier. This device is not bridgeable nor have Bass Boost. However, it is enhanced with Dynamic Bass Optimization.

Appearance: The durable chassis with internal lighting is attractive in its appearance too. Like its performance it proves to be one of the best you have ever had.

Make music live and lovely with the help of this wonderful machine. When such fabulous joys are awaiting you why miss it!
 

Jbl GTO4000 4 Channel Amplifier

Amplifiers make the sound sweeter without loosing any of the sound signals. Enhanced sound performance is possible with quality amplifiers. With so many names in the field one name that can be trusted on is Jbl GTO4000 4 Channel Amplifier. All the features and functions of the device cater to all your amplifying needs and maximum safety and quality is ensured. In short the unit is very user friendly and can be used effectively. Compact storage is made possible with a dimension of (H) 5.5 cm, (W) 35.8 cm, (D) 29.4 cm. This is a car audio amplifier.

Effective audio
This unit supports multi channel adding to the benefit of the unit. The RMS power at 4 ohms is calculated as 50 W x 4 and RMS power at 2 ohms is calculated as 75 W x 4. 10 Hz - 40000 Hz is the frequency response supported in this unit. Quiet operation is facilitated with a sound ratio of 92 dB. The sound produced is very effective as the features bass boost function with a frequency of 45 Hz.

In case of over load the unit will be protected from internal damage. Thus the safety aspect of this amplifier is well taken care of. It also facilitates variable crossover and variable bass boost features. This is a 3 way ready unit. All the functions accounts for the better use of this product. For all your audio performance you can completely rely on this unit. The THD at rated RMS power is of 0.1 %. All these features contribute to the standard of this Jbl GTO4000 Multi Channel Amplifier.

• Recent Posts

  • NAD CI9060 Amplifier
  • NAD C355 Amplifier
  • Yamaha A-S700 Amplifier
  • Advance Acoustic MAA406 Amplifier
  • Yamaha P3500S Amplifier

• Contact us
• About us
• Resources
• Special Offers