LP/HP/flat is the cross over characteristics of the unit. This amplifier comes with Built-in variable electronic crossover. 85dBA is the signal to noise ratio of the unit and offers 10Hz-100 kHz (-3dB) frequency response. RCA low-level preamp inputs, RCA low-level preamp inputs and Auxiliary outputs are the connectivity options in the unit.

For varied audio feel you can go for the bass boost feature of the amplifier. The gadget is highly recommended to use in a car. This innovative model comes with a range of features to amaze you with the music performance. 12 dB/octave is the supported cross over slope.

60 Watt – 4 Ohm – 4 channel(s), 80 Watt – 2 Ohm – 4 channel(s), 160 Watt – 4 Ohm – 2 channel(s) is the output details of the unit. The gadget supports active cross over in addition to Short circuit protection and temperature projector.

For operation the gadget requires 0.2 – 6V input signal voltage. This bridgeable model offers 60 W x 4 RMS Power at 4 Ohms and 80 W x 4 RMS Power at 2 Ohms. JBL GT5-A604 640Watts Amplifier has Width 9.25 in, Depth 12 in. and Height 2.13 in.

JBL has designed to provide the model with a peak power of 450W with a Signal-to-Noise (dBA) of 95dBA. RMS Power @ 1Ohm is 300W, RMS Power @ 4Ohms is 175W and RMS Power @ 2Ohms is 225W. It is designed to function as a low pass crossover. The amplifier is provided through a mono channel. Full range preamp outputs for JBL GT5A3001 Mono Channel Amplifier are provided facilitating multiple amplifier hookups without the need for high-loss Y-adapters or signal splitters.

This amplifier also has Auxiliary line-level outputs.

JBL GT5A604 Amplifier

This 4 channel amplifier strengthens low power signals and delivers you strong output result.

Amplifier is class AB type and is provided with cast aluminium heat sink. It is equipped with built in crossover. It constitutes a THD of 1%.

Variable high-pass filter ranges from 20 to 320 Hz at 12 dB/octave and variable low-pass filter ranges from 20 to 320 Hz at12 dB/octave.

Frequency response is ranging from 10 to 100000 Hz. Signal-to-noise ratio is 85 dB. Bass boost ranges from 0 to 6 dB. Minimum impedance in unbridged is 2 ohms and the minimum impedance in bridged is 4 ohms.

JBL GT5A604 class AB Amplifier constitutes a total RMS output power of 320 watts.
RMS power rating is 60 watts x 4 channels at 4 ohms and 80 watts x 4 channels at 2 ohms.

The power rating is 160 watts x 2 channels at 4 ohms for the bridged. LED power and protection indicators ensure safety.

Available dimensions are 12″ (L) x 9-1/4″ (W) x 2-1/8″ (H). Manufacturer offers 1 year warranty.

This JBL amplifier offers 200 W x 1 RMS power at 4 ohms and 300 W x 1 RMS power at 2 Ohms. It supports bass boost sound for tremendous sound explosion and the frequency response provided is 10 Hz – 300 Hz. With 100 dB signal to noise ratio, you can achieve quality audio. Moreover, it is designed with 12dB per octave electronic crossover.

The JBL CS300.1 Mono Amplifier supports features like Tuned Bass EQ, Single channel operation, LED power and protection indicators, Preamp RCA outputs, DC protection circuitry and Variable low-pass filter. The system tuning is depended upon the loudspeaker setup and speaker placement. High security measurements prevent this stylish gadget from hazards. Company provides one year of warranty for service and support.

This amplifier supports 10 Hz – 27000 Hz Frequency Response, 85 dB SNR and 1 % THD at Rated RMS Power. With bass boost function it will definitely impress all bass lovers. Input Voltage offered is 14.4 volt. This amplifier with 3 Way ready is designed to amaze its listeners with power packed audio performance. With the availability of onboard 12dB electronic crossovers, it offers tuning options for systems of any size.

Easy installation even in tight spaces is possible with its profile heatsink design. Large-gauge barrier strips are also included. Constructed with marinized circuit boards, it prevents corrosion and the action of salt from the critical circuit path. JBL MA6004 Amplifier is offered with 1 Year Manufacturers Warranty. At full power the device consumes power of 50 Amps. This device measures (W) 337 x (D) 261 x (H) 56mm and weighs 2.5Kg. For added safety, this amplifier features Protection Circuit as well.