Kenwood eXcelon X1200M Car Amplifier
February 14, 2010
Plenty of car amplifiers are available in the market that improves the sound performance in your vehicle. Considering your specific needs and listening preferences, you can choose an ideal amplifier for your car. For simple to complex amplifiers are commercialised to satisfy the changing needs of the users. The well constructed Kenwood eXcelon X1200M Car Amplifier performs well in your vehicle. Besides, it can be stored and handled conveniently without any worries.
Engineered to offer excellent amplification, this amplifier makes sure that you get satisfactory results throughout. This mono channel amplifier is powered to give you the best amplification output. It supports 75 dB Signal to Noise Ratio. Since it comes with limited features, you will be able to handle the device easily. The device supports 1 Equalizer Band and you can enjoy music in that sound setting.
The weak and feeble audio signals from your car audio system are amplified to a large extent. With compact size and lightweight, you can handle this amplifier conveniently. Kenwood eXcelon X1200M Mono Car Amplifier is simple to operate but offers exceptional audio performance.
| General Information | |
|---|---|
| Brand | Kenwood |
| Model | Kenwood eXcelon X1200M Car Amplifier |
| Type of Amplifier | Mono channel |
| Signal to noise ratio | 75 dB |
| Number of Channels | 1 |
| Equalizer | Yes |
Kenwood KAC-9104D Car AmplifierKenwood KAC-9104D Car Amplifier
November 8, 2009
The Kenwood KAC-9104D Car Amplifier enhances the sound of your 
music system. It delivers powerful acoustic sound that you have never imagined. Besides, it is very small and compact so that you can easily place it even under your car seat. It measures 350mm in width, 59mm in height and 238mm in depth. It weighs 3.4 kgs.
This lovely amplifier brings out every minute detail in your brand of music with rich and incredible effects to make your songs highly enjoyable. This Class D amplifier is provided with a load capability of 1 ohm stable. It has a maximum output power of 1800 watts with 500 watts x 1 at 4 ohms and 900 watts x 1 at 1 ohm rated power output. The connectors include 1 RCA gold platted line in, 1 RCA gold plated line out, speaker level input, single side terminals, Gold Plated Power & Speaker Terminals and Die-Cast Aluminium Heat Sink.
The stylish Kenwood KAC-9104D Mono Channel Car Amplifier is provided with a signal to noise ratio of 75 dBA, THD is 0.8% and a frequency response of 5 Hz to 200 Hz. The maximum current consumption is 55 A while the operating voltage is 14.4 V. Other features include low pass filter, bass Boost circuit, infrasonic circuit, phase inverter, dual mono drive capability, cooling fan, switched mode power supply, power indicator, blue illumination, signal sensing turn-on and protection function.
| General Information | |
|---|---|
| Brand | Kenwood |
| Model | Kenwood KAC-9104D Car Amplifier |
| Weight | 3.4 kgs |
| Dimensions | 350 x 59 x 238mms |
| Impedance in ohms | 4 Ohms |
| Total Harmonic distortion | 0.8% |
| Wattage | 1800 watts |
| Signal to noise ratio | 75 dBA |
| Number of Channels | 1 |
Kenwood KAC 8402 Amplifier
October 26, 2009
Kenwood Amplifiers are famous for their precision and highly enhanced audio output. Kenwood KAC 8402 Amplifier is a Bridgable device (180 x 2 watts Bridged Power) with Multi Channels and MOSFET Circuitry. Giving an incredible sound performance, the device has the Low - Pass Frequency 50 Hz - 200 Hz and 50 Hz - 200 Hz High - Pass Frequency.
With a total 720 Watts Output power, the product features an RMS Power of 60W x 4 at 4 Ohms and RMS Power of 90W x 4 at 2 Ohms. Bass boost function in it has a Crossover bass boost frequency of 90 Hz and Crossover bass boost gain is 0 to +6dB. In spite of the high input signal voltage of 0.2 - 5V, the amplifier has a 100db signal-to-noise ratio. Connections facilitated in the AB class amplifier are 2 x Audio line-in ( RCA phono x 2 ), 1 x Audio line-out ( RCA phono x 2 ), Speakers output ( Screw-type ), Speakers input and DC power input ( Screw-type ).
Dimensions of Kenwood KAC 8402 720 Watts Amplifier are 15 x 11.31 x 2.38 inches and weight is 12.8 lbs. The unit which comes with one year warranty includes other features such as 3 Way Ready, Active crossover, Crossover slope 12 dB/octave, Input selector, Mono/stereo switch, Input level controls, Min 4 Impedance Bridged, Min 2 Impedance Unbridged, 1% THD at Rated RMS Power, AB Amplifier Class, 40×1 Fuse Rating, 1 pair Preamp Outputs and LED Power Indicator
| General Information | |
|---|---|
| Brand | Kenwood |
| Model | Kenwood KAC 8402 Amplifier |
| Weight | 12.8 lbs. |
| Dimensions | 15 x 11.31 x 2.38 inches |
| Impedance in ohms | 4 Ohms |
| Total Harmonic distortion | 1% |
| Wattage | 720 Watt |
| Variable crossover | Low – Pass: 50 Hz - 200 Hz High – Pass: 50 Hz - 200 Hz |
| Signal to noise ratio | 100db |
| Number of Channels | 4 |
| Warranty | 1 year |
Kenwood KAC-8103D Amplifier
October 23, 2009
Kenwood KAC-8103D Amplifier is a single channel amplifier 
which is recommended for car use. It has D-class amplifier circuit and 10k Ohms input impedance. The system has 1000 watts maximum output power and built in low pass and infrasonic filter. Additionally it has input level controls.
This amplifier has an amplifier output of 300 watts at 4 ohms and 500 watts at 2 ohms for one channel. The low pass frequency of the system is 50-200 Hz and the crossover slope is 24dB/octave. The system has 15/25 Hz (18dB/oct) infrasonic filter. This amplifier has RCA line output terminals for adding additional amplifiers. It has MOSFET switching power supply. The response bandwidth of the system is 5-200 Hz. It has a signal to noise ratio of 100dB and input signal voltage of 0.2 – 5 V. This amplifier has built in bass boost circuit. It has power indicator and gold plated power and speaker terminals. Single sided terminals are provided. The bass boost gain of the system is 0 to 18dB and bass boost frequency is 40 Hz. The total harmonic distortion of the system is as low as 1%.
The connector types included in Kenwood KAC-8103D 1000 Watts Amplifier are DC power input ( screw-type ), Speakers output ( screw-type ), audio line-out ( RCA phono x 2 ), audio line-in ( RCA phono x 2 ) and Speakers input. The current consumed by the system is 40 A and the operating voltage is 14.4 V. It has dimensions of 318 x 64 x 286mms and a weight of 2.9 Kg.
| General Information | |
|---|---|
| Brand | Kenwood |
| Model | Kenwood KAC-8103D Amplifier |
| Weight | 2.9 Kg |
| Dimensions | 318 x 64 x 286mms |
| Type of Amplifier | 318 x 64 x 286mms |
| Impedance in ohms | 10 k Ohms |
| Total Harmonic distortion | 1% |
| Wattage | 1000 watts |
| Variable crossover | 50-200 Hz |
| Signal to noise ratio | 100 dB |
| Number of Channels | 1 |
Kenwood KAC-6403 Amplifier
October 19, 2009
The main purpose of an amplifier is to take in a weak signal from a 
device and makes it stronger enough to drive a loud speaker. Kenwood KAC-6403 Amplifier is a 4 channels power amplifier recommended for car. The system is bridgeable as well and has a load capability of 2 Ohms.
This amplifier has an output power of 40 Watts at 4 Ohms for 4 channels, 60 Watts at 2 Ohms for 4 channels and 120 Watts at 4 Ohms bridged for 2 channels. The total output power of the system is 500 Watts. It has built in high level speaker inputs and RCA line input terminals. This amplifier has MOSFET switching power supply and Aluminium Die-casting heat sink. It has power indicator with red LED. The response bandwidth of the system is 10 -50,000 Hz. It has a signal to noise ratio of 100dB. The system has built in variable high and low pass filters. The low pass filter of the system is 80Hz and the high pass filter of the system is 80Hz. The cross over slope of this amplifier is 12 dB/octave. The total harmonic distortion produced by the system is 1%.
The maximum current consumed by Kenwood KAC-6403 500Watts Amplifier is 25A. It has an operating voltage of 14.4V. The connectivity interfaces of this amplifier are 2 audio line-in ( RCA phono x 2 ), Speakers output ( screw-type ) and Speakers input DC power input ( screw-type ). The input signal voltage of the system is 0.2 - 5V. It has dimensions of 33 x 22 x 6cm and weight of 2.6 Kg.
| General Information | |
|---|---|
| Brand | Kenwood |
| Model | Kenwood KAC-6403 Amplifier |
| Weight | 2.6 Kg |
| Dimensions | 33 x 22 x 6cms |
| Type of Amplifier | Power amplifier |
| Impedance in ohms | 2 Ohms |
| Total Harmonic distortion | 1% |
| Wattage | 500 Watts |
| Variable crossover | 80 Hz |
| Signal to noise ratio | 100 dB |
| Number of Channels | 4 |
