This new amplifier features full short circuit, open circuit, thermal, infrasonic, ultrasonic and RF protection. On/off muting and DC-fault power supply shutdown is enabled in the device for load protection.

The unit provides audios with 600W RMS power (at 8ohms) and it has 2-Step Class H output circuitry. 20 Hz-20 kHz/0.5 dB frequency response of the device is also commendable. Damping Factor of the device is greater than 200.

It enables 5.5 Vrms (+15 dBu) input clipping and 3-pin XLR and 1/4″ TRS balanced input on each channel. High quality cooling fan integrated in the device has changing operation speed and rear-to-front air flow system.

Detented gain attenuator and power On/Off button are integrated on the front panel of the gadget. Along with this, the panel holds LED indicators for displaying the amplifier status. It also features less than 0.02% total harmonic distortion.

Measuring 8.9 x 48.3 x 22.7 cm, it is easy to handle this new model. You can place it on the table horizontally. It weighs 13lbs only.

QSC PLX-1804 Grey 600W Amplifier provides 20k ohms balanced and 10k ohms unbalanced input impedance. It will bring more enjoyment in your life.

The RMS Power at 4 Ohms is 650 W x 2 and RMS Power at 2 Ohms is 1200 W x 2. The device supports a Frequency Response of 20 Hz – 20000 Hz and Signal to Noise Ratio is 100 dB. The THD at Rated RMS Power is 0.03 %. Low – Pass Frequency is calculated as 30 Hz – 50 Hz. Input voltage required by this amplifier is 1.23 volt. The technical side of this amplifier is beyond compare and it offers satisfactory performance till the very end.

QSC RMX-2450 Dual Channel Car Amplifier comes clad in a solid case of size 15.9 x 3.5 x 19 inches. This device is offered with 6 years warranty as extended customer support. This amplifier is designed complying with all the industry standards and this makes it a better alternative to expensive brands. Listen to music which soothes your soul and excites you ears.

It is compatible with DVD-Audio. Dolby Prologic II, Digital / Analogue and Audio 5.1 are supported in this amplifier. The impedance is rated as 8 Ohms. It is equipped with Power, clip, -10dB and signal present LED’s.

It is built with dimensions of 8.9 x 48.3 x 32.6 cm. This power amplifier is pretty light with a weight of 9.5 kg. The unit has an advanced cooling design with front exhaust. Front-panel gain controls are provided in this device. It consists of Balanced XLR inputs with TRS connectors.

The unit features Clip limiting and Thermal limiting. Switch able / defeat able clip limiters are featured as well. Besides these, Speakon NL4 and binding post outputs are provided. For bi-amping subwoofer and satellite systems, 100Hz high-pass and low-pass filters are included. The woofers are protected from damage with the availability of Switch able/defeat able 33Hz infrasonic filters. QSC PLX-3602 Power Amplifier rules the market with its unbeatable audio performance.

This elegant black amplifier is well reputed for its exceptional performance ability and efficiency. It offers superior thermal performance that ensures advanced continuous power in 2 ohms stereo or 4 ohms bridged applications. In addition, it consists of self-regulating defeatable clip limiters that decrease distortion without compromising on peak performance.

The sleek QSC RMX850 Black Power Amplifier consists of selectable low frequency filters that boost the system response, protect speakers and ensures low end tightness by more precisely matching the amplifier’s range to that of the loudspeakers. In addition, the Barrier strip, XLR and 1.4 inches balanced inputs along with Speakon and binding post outputs facilitate easy connections. Further, the low noise variable speed fans with rear to front air flow helps in keeping the amplifier and racks cool.

This power amplifier consists of high current Torodial transformers that ensure greater power and less noise. It has a signal to noise ratio of 100dB and a frequency response of 20 Hz to 20 kHz. The damping factor is 1 kHz and below and greater than 300 at 8 Ohms. The power requirements include 100, 1200 and 230 V AC with 50/60 Hz frequency. Other features include on/off muting, AC coupling, triac crowbar, amplifier protection and power on indicator. The controls include AC switch, Ch. 1 and Ch. 2 gain knobs and Rear: 10-position DIP switch. The company provides 3 years warranty for the product.

If you feel that it will not match your exact power needs, you’re wrong, because it has 8 models which include five low impedance and three 70V direct types. A custom made security cover is also integrated which makes the installments tamper proof.

It also features a variable speed fan for low noise and it has 1 dB detented gain control, if you want your settings to be fast and accurate. The active inrush limiting eradicates the AC current and as a result, the excess power sequence is also removed. The unit has XLR and Euro style input connectors that can be detached. It has HD15 Data Port connector ideal for QS Control, computer control or even Signal processing accessories.

This QSC amplifier also features a Dip switch control which is used for clip limiters, high pass filters that can be selected to protect the speakers and prevent its transformer saturation with a nominal effect on program material. LED panels in the front and rear show the status of the switch at one look for convenience.

Protection circuitry including DC, thermal overload, infrasonic and short circuit are also endowed. The output connector type is barrier strip and has class H circuitry for higher efficiency. The accessory pack includes an external transformer for isolated 70 and 100 volts.

There are three selectable input gains which are 26 dB, 32 dB and 1.2 V. XLR/M and XLR/F connectors are used for easy connectivity. QSC CX-1102 Black Power Amplifier promises us a 3 year warranty and the service contract can be extended for 3 more years.