Sony XM-GTX1302 Amplifier

It produces 130 Watts x 2 RMS at 4 Ohms1, 170 Watts x 2 RMS at 2 Ohms and 340 Watts x 1 RMS at 4 Ohms.

The amplifier supports High Level input with sensing power on. 5 – 50 kHz (+0/-3 dB) is the frequency response supported by it

The unit comes with 0.05% harmonic distortion and offers clean audio result time after time. The device is associated with 0-10dB Variable low boost facility for optimal music experience. It features 2/1 channel configuration. It has got built in 80 Hz High-pass filter in the device to offer balanced audio delivery.

For optimal result the device gives you freedom to go for either the high pass or low pass filter. 93 dBA is the signal noise ratio of the amplifier to produce the best audio with literally no noise.

The appealing audio quality is obtained with the aid of various tone controls featured in it. This smart performer is a Two-channel bridgeable amplifier with MOSFET power supply.

The amplifier is integrated with a barrage of interfaces such as RCA Pin Jacks, High Level Input Connector, Speaker terminals with screws, Pin Jacks for seamless connectivity.

10.5-16V is the input voltage needed to make the device operational. Sony XM-GTX1302 80 Hz High-pass filter Amplifier is a yet another easy to install gadget from Sony with super built quality and intense performance.

This feature rich amplifier comes with 4 / 3 / 2-channel with 2ohms stable load capacity and the impedance ranges are varying from channel to channel. Subsonic High Pass Filter integrated this high end model has 50-300 low/high pass frequency.

Signal to noise ratio of the device is 100dB and it possesses 0.5 / -3dB tolerance. DDS and ATC capable this inventive model incorporates balanced input circuit.

Active crossover captive this 4-channel amplifier enjoys 12dB/oct crossover slop. The maximum output power of the device is 150W x 4 and the continuous flow is 70W x 4.

Toroidal transformer integrated this high end model has 0.3 – 6V in-in input sensitivity and 0-10 dB bass boost frequency to strengthen the audio playback.

This attractive amplifier comes in (W) 424 x (D) 248 x (H) 55 mm size and weighs 3.1kg only. It is carried out with gold plated connectors which ensures good surface resistance. Sony XM-ZR704 150W Car Amplifier offers digital signal quality to the audios to make a stunning audio playback.

This stylish black sound amplifier supports a single channel. It consists of a maximum output power of 600 watts per channel and a continuous power of 330 watts per channel. It consists of high level inputs. Further, this smart model has a crossover slope of 12 dB/octave. The crossover low pass frequencies is 50 to 300 Hz while the bass boost frequency is 40 Hz.

The splendid Sony XM-ZZR3301 Car Amplifier has a total output power of 1100 watts. The THD is 0.01 %the connectors include 1 x Audio line-in (RCA phono x 2), 1 x Audio line-out (RCA phono x 2), Speakers input and Speakers output (Screw-type).

It features Subsonic filter, gold plated connectors, Toroidal transformer, Balanced input circuit, Speaker level input and MOSFET power supply. Other functions include Dynamic distortion suppressor and Active thermal control.

This amplifier has a maximum power output of 280 Watts per channel at 4 Ohms and 400 Watts per channel at 2 Ohms. The Hi/Low pass filter of this amplifier is 80 Hz. It has 12dB/oct selectable slope. This device can be used as a bridging amplifier with a maximum output of 800 watts. It allows direct connection with the speaker output of your cars audio unit if it is not equipped with a line output. The ‘Hi-level sensing power On’ feature allows unit to be activated without need for remote connection. Dual mode connection is possible with this amplifier for a multi speaker system. It has protection circuit and pulse power supply for stable and regulated output power. The unit has RCA pin jacks and high level input connector.

The signal to noise ratio of the system is 93 dBA and its frequency response range is 5 to 50 Hz. The total harmonic distortion is 1%. The unit has dimensions of 321 x 55 x 200 mm. This Sony Amplifier requires 12 V DC supply. The voltage required is 10.5 to 16 V. Four mounting screws, a high level input cord and a protection cap are supplied with Sony XM-ZR1252 Dual Channel Car Amplifier.

This Sony amplifier supports 5 – 300Hz Response Bandwidth and 90dB Signal-To-Noise Ratio. The Input Signal Voltage is 0.3 – 6V and 40 Hz is the Bass Boost Frequency. This Class D amplifier offers power output of 290 Watt – 4 Ohm – THD 1.0% – 1 channel(s) and 500 Watt – 2 Ohm – THD 1.0% – 1 channel(s). Input level controls and subsonic filters are included in this amplifier. On the connectivity side, this device features 2 x audio line-in (RCA phono x 2) and Speakers output (screw-type).

Sony XM-1S Amplifier is powered to strengthen the audio signals and to power your audio entertainment. This highly powerful amplifier gives you maximum sound performance. Apart from being powerful, this amplifier is very cost effective and reliable.