The purpose of an amplifier is to take an input signal and increase its amplitude. They find application in all kind of electronic devices designed to perform any number of actions. Dual Electronics XPA6100 Amplifier is a mono channel amplifier with MOSFET power supply. It has extruded aluminium heat sink and dynamic power output of 600 watts at 2 Ohms.
XPA6100 amplifier has low level RCA inputs and high level speaker inputs. It has variable input level control and variable crossover. The variable crossover slope of the amplifier is 12 dB/Octave and the variable bass boost is 12 dB. The RMS power output produced is 200 Watts for one channel at 4 Ohms and less than one percent total harmonic distortion. It has an RMS output of 300 Watts for one channel at 2 Ohms impedance. The device has class AB output design and 2 Ohm stable stereo operation. It has barrier strip connection terminals. This amplifier has side mounted controls and Bi-colour LED status indicator. It has auto-reset thermal protection, speaker short circuit protection and reverse polarity protection.
The signal to noise ratio of Dual Electronics XPA6100 Mono Channel Amplifier is 72 dBA. It has an input voltage of 14.4 V DC and frequency response of 20 Hz to 200 Hz. The minimum input signal is 200 mV and the maximum input signal is 6 V. It has a dimension of H) 4 x (W) 15 x (D) 11 inches. The company offers a warranty valid for a period of one year for this amplifier.
| General Information | |
|---|---|
| Brand | Dual Electronics |
| Model | Dual Electronics XPA6100 Amplifier |
| Dimensions | (H) 4 x (W) 15 x (D) 11 inches |
| Total Harmonic distortion | Less than one percent |
| Wattage | 600 watts |
| Variable crossover | 12 dB/ Octave |
| Signal to noise ratio | 72 dBA |
| Number of Channels | 1 |
| Warranty | 1 year |
Related posts: