Dynacord CL-1600 Amplifier has stirred up the competition with its high degree of performance and powerful outputs. This power amplifier is developed to bring in unhindered performance and it strengthens the feeble signals effectively. The unit supports a Load Impedance of 2 O, 4 O and 8 O and the maximum output power is 2 O – 1100W, 4 O – 800W and 8 O – 500W from the two channels. Stereo is the sound type produced by this device. The rated output power is 4 O – 700W and 8 O – 350W.
The input sensitivity, at rated output power is +4.7dBu (1, 33 V RMS). THD is calculated as < 0.05% at MBW = 80 kHz, 1 kHz, < 0.02% at IMD-SMPTE, 60Hz, 7 kHz and <0.01% at DIM 30, 3.15 kHz, 15 kHz. Frequency response is 15Hz – 40kHzb and the input Impedance is 20kO. All these result in unhindered amplification results.
Damping Factor at 1 kHz is > 300 and the supported Slew Rate is 35 V/µs. The featured SNR is 107.0 dB, Output Noise, A-weighted is < -70 dB. Voltage required by this device includes 100V, 120V, 220V, 230V or 240 V at 50Hz- 60Hz and consumes maximum power of 660W. The safety of the unit is well taken care of and it is provided with protections such as Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters and Turn on delay.
3-stage fan cooling from front to rear is supported in this unit. Ambient Temperature Limits are +5°C – +40°C (40°F-105°F). Dynacord CL-1600 Power Amplifier comes with dimensions of width 483 x height 88.1 x depth 386.8mm and weighs 16 kg.
| General Information | |
|---|---|
| Brand | Dynacord |
| Model | Dynacord CL-1600 Amplifier |
| Weight | 16 kg |
| Dimensions | Width 483 x height 88,1 x depth 386.8 mm |
| Type of Amplifier | Power Amplifier |
| Input Impedance | 20kO |
| Total Harmonic distortion | <0.05% at MBW = 80 kHz, 1kHz, < 0.02% at IMD-SMPTE, 60Hz, 7kHz and <0.01% at DIM 30, 3,15kHz, 15kHz |
| Wattage | 660 Watt |
| Signal to noise ratio | 107.0 dB |
| Sound System | Stereo |
| Number of Channels | 2 |
Related posts: