Week and feeble audio signals does not grab attention of the audience or the listener. It is necessary to strengthen these audio signals in order to enthral the listener. Perfect amplification is attained with the proper functioning of Dynacord CL-800 Amplifier. This unit is powered to bring that extra detailing to the audio performance. It has dimensions of Width 483 x Height 88.1 x Depth 386.8.
Stereo is the sound mode supported in this amplifier, which assures effective audio output. Powerful performance is made possible with a power effect of 2×240 Watt. Better management is made possible with its light weight of 13.5 kg.
Amplification Details
• Max. Midband Output Power THD = 1%, 1 kHz, Dual Channel: 600W (2 ohms) 400W (4 ohms) 240W (8 ohms)
• Rated Output Power THD < 0.1%, 20Hz – 20 kHz: 300W (4 ohms) 150W (8 ohms)
• Max. Single Channel Output Power Dynamic Headroom, IHF-A: 1100W (2 ohms) 580W (4 ohms) 300W (8 ohms)
• Max. Single Channel Output Power Continuous, 1 kHz: 800W (2 ohms) 480W (4 ohms) 270W (8 ohms)
• Max. Bridged Output Power THD = 1%, 1 kHz: 1200W (4 ohms) 800W (8 ohms)
• Maximum RMS Voltage Swing THD = 1%, 1 kHz: 50V
• Power Bandwith, ref. 1kHz THD =1%, half power @ 4 ohms: 10Hz – 60 kHz
The voltage Gain, ref. at 1 kHz is 32.0 dB. Input Sensitivity at rated output power is calculated as +1.15dBu (0.88 V rms) and the Input Impedance, active balanced is 20kohms. This amplifier supports < 0.05% as its THD at rated output power MBW = 80 kHz, 1 kHz. Maximum input level included is +22dBu (9.76 V rms). Crosstalk ref. 1 kHz, at rated output power is < -80 dB and Frequency Response ref. at 1 kHz (- 1dB) is 15Hz – 40 kHz.
Damping Factor at 1 kHz is >300. Signal to Noise Ratio is 103.5 dB and the output noise is < -70 dB. Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, In-rush current limiters and Turn on delay are the protective features provided. It consists of a Front-to rear, 3-stage fans. Dynacord CL-800 Integrated Amplifier operates to suit your varying amplification needs.
| General Information | |
|---|---|
| Brand | Dynacord |
| Model | Dynacord CL-800 Amplifier |
| Weight | 13.5kg |
| Dimensions | Width 483 x height 88.1 x depth 386.8mm |
| Type of Amplifier | Integrated |
| Input Impedance | 20kOhms |
| Total Harmonic distortion | < 0.05% |
| Output power | 2×240 Watt |
| Signal to noise ratio | 103.5 dB |
| Sound System | Stereo |
Related posts: