Pioneer A-209R Amplifier gives you a high definition sound output apart
from speaker facilities and low power consumption. The looks of this home audio amplifier device are attractive and it has a remote control that makes the use of the device easy.
Product Details
The dimensions of Pioneer A-209R Stereo Amplifier are (W) 42 cm, (D) 30.7cm and (H) 11.4 cm. Weighing 4.7kg it has stereo sound output mode and the response bandwidth is 5 – 100000 Hz. The Signal-To-Noise Ratio comes to 91 dB and there are 2 channel output. The Output Power comes to 90 Watt whereas the Input Impedance is 50 kOhm whereas the Input Sensitivity is 200 mV. 0.08% is the Total Harmonic Distortion
The Amplifier Output details are as mentioned hereafter:
• 60 Watt – 4 Ohm – at 1 kHz – THD 1.0% – 2 channel(s) ( main )
• 45 Watt – 8 Ohm – at 1 kHz – THD 1.0% – 2 channel(s) ( main )
• 35 Watt – 8 Ohm – 20 – 20000 Hz – THD 0.1% – 2 channel(s) ( main )
• 45 Watt – 4 Ohm – 20 – 20000 Hz – THD 0.15% – 2 channel(s) ( main )
This Stereo amplifier is provided with bass, Volume, treble, direct (for tone bypass), loudness, independent A/B speaker output switching, source selection (CD, tuner, phono, line, tape1/md) and tape 2 monitor switch controls.
Other than an A-B speaker switch it has a Headphone Jack connector. The remote control provided is infrared and the other connectors are 1 x headphones (phone stereo 6.25 mm) – front, 1 x turntable audio input (RCA phono x 2) – rear, 5 x audio line-in (RCA phono x 2) – rear, 1 x system components control bus – rear, 4 x speakers output – rear, 2 x audio line-out (RCA phono x 2) – rear. It has an internal power supply and the required voltage is AC 230V (50 – 60 Hz) while the Operational Power Consumption is 130 Watt. The given Audio SNR is 91 dB while the Frequency Response is 5 Hz – 100 kHz. The RMS Power at 4 Ohms will be 60 W and for 8ohms it is 45 W.
The total Harmonic Distortion comes to 0.08 % and its finish is in black. The extra fitting are a Metal Oxide Semiconductor Field Effect Transistor (MOSFET) power-supply, control (SR) out for interactive control of other compatible Pioneer equipment. Other added features are Wide-Range Linear Circuit, Direct Energy MOSFET Circuit, Low-Impedance Driving Capability, Large Insulators, Symmetrical Construction, Sound Stabilisers, Aero Wing Chassis, “Silent” Microprocessor System, phono Local Off Circuit, Complementary Capacitor Pair, Two-Way Dubbing, 6 Audio Inputs, Discrete Outputs (All Channels) and A+B (Parallel).
The input (Sensitivity/Impedance) are PHONO (MM)-2,8 mV / 50 k/ohm, CD, TUNER, AUX, TAPE -200 mV / 50 k/ohm.
| General Information | |
|---|---|
| Brand | Pioneer |
| Model | Pioneer A-209R Amplifier |
| Weight | 4.7kg |
| Dimensions | (W) 42 cm, (D) 30.7cm and (H) 11.4 cm |
| Type of Amplifier | Stereo |
| Impedance in ohms | 50 kOhm |
| Total Harmonic distortion | 0.008% |
| Wattage | 90 Watt |
| Signal to noise ratio | 91dB |
| Sound System | Stereo |
Related posts: