QSC GX5 Amplifier is an exceptional device in performance. The device offers great support to the speakers for producing efficient output. The product is powerful one with consistency.
The signal to noise ratio of the amplifier is 100dB. The supported input sensitivity is 1.2V. The voltage gain of the device is 34.4dB. The provided output circuitry of the system is 2-tier class ‘H’. The power consumption of the amplifier is 6A. The frequency response of the device is 20 Hz – 20 kHz. The dynamic headroom required is 2dB. The supported damping factor is 100. The input impedance of the device is greater than 20k. The maximum input level of the amplifier is +24dB.
The output power details are 8 ohms/ 1 kHz (both channels driven) is 500 W, 8 ohms/ 1 kHz (single channels driven) is 600 W, 4 ohms/ 1 kHz (both channels driven) is 700 W and 4 ohms/ 1 kHz (single channels driven) is 850 W.
The supported input connectors are 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono and unbalanced. The output connectors for each channel are speakon, 1/4-inch and Binding Posts. The supported amplifier and load protection of the device are Short circuit, Open circuit, Thermal, RF protection and Load protected against DC faults.
Gain controls with 21 detents are included on the front panel of the amplifier. The indicators supplied are red clip LED with proportional and 0.1% THD threshold, green signal LED with 35dB threshold and blue power LED. The rear panel includes full range and cross over switches. A subwoofer is built in the device.
The QSC GX5 Stereo Power Amplifier has the dimension of 3.5 x 19 x 10.1 inches and the weight is 26 lbs. The system has a low depth and hence it will be fitted in any compact area. The power levels of this power amplifier help you to match the device with almost all speakers. Guard rail is capable to protect both the system and speakers from the excess temperature rise.
| General Information | |
|---|---|
| Brand | QSC |
| Model | QSC GX5 Amplifier |
| Weight | 26 lbs |
| Dimensions | 3.5 x 19 x 10.1 inches |
| Type of Amplifier | Stereo |
| Total Harmonic distortion | For 8 ohm is less than 0.05% and 4 ohms is less than 0.1%. |
| Signal to noise ratio | 100dB |
| Sound System | Stereo Power Amplifier |
Related posts: