Sony is a very well known and expert electronic manufacturer developing variety of electronic products. Sony XM-ZR1252 Car Amplifier is a dual channel car amplifier which is used to boost up the music system in your car.
This amplifier has a maximum power output of 280 Watts per channel at 4 Ohms and 400 Watts per channel at 2 Ohms. The Hi/Low pass filter of this amplifier is 80 Hz. It has 12dB/oct selectable slope. This device can be used as a bridging amplifier with a maximum output of 800 watts. It allows direct connection with the speaker output of your cars audio unit if it is not equipped with a line output. The ‘Hi-level sensing power On’ feature allows unit to be activated without need for remote connection. Dual mode connection is possible with this amplifier for a multi speaker system. It has protection circuit and pulse power supply for stable and regulated output power. The unit has RCA pin jacks and high level input connector.
The signal to noise ratio of the system is 93 dBA and its frequency response range is 5 to 50 Hz. The total harmonic distortion is 1%. The unit has dimensions of 321 x 55 x 200 mm. This Sony Amplifier requires 12 V DC supply. The voltage required is 10.5 to 16 V. Four mounting screws, a high level input cord and a protection cap are supplied with Sony XM-ZR1252 Dual Channel Car Amplifier.
| General Information | |
|---|---|
| Brand | Sony |
| Model | Sony XM-ZR1252 Car Amplifier |
| Dimensions | 321 x 55 x 200 mm |
| Type of Amplifier | Dual Channel Car Amplifier |
| Impedance in ohms | 4 Ohms |
| Total Harmonic distortion | 1% |
| Wattage | 400 Watts |
| Variable crossover | 5 to 50 Hz |
| Signal to noise ratio | 93 dB |
| Number of Channels | 2 |
Related posts: