The Yamaha P Series P2500S Amplifier is able to deliver high output power with tremendous performance. Variations in power levels make the device a wonderful device.
In 1 kHz frequency the THD of the amplifier is 1% and the power produced by the 8 ohm stereo is 275W + 275W. The illuminated power from the 4 ohm stereo is about 390W + 390W. The system offers 780W power while the connection is in 8 ohm bridge. The other supported power levels are 650W + 650W for 20ms non clip 2 ohm stereo and 1300W for non clip 4 ohm bridge. The used EEE engine technology offers correct utilization of AC power without disturbing sound quality or output power.
The supported frequency response of the amplifier is 0dB, +0.5dB and -1dB. Minimum 70dB per 1 kHz is the channel separation possible in the device. The provided bandwidth of the amplifier is 10Hz – 40 kHz. The possible residual noise in the product is maximum 70dB. The provided signal noise ratio to the amplifier is about 100 dB. The supplied damping factor of the device is 200 maximum.
This most efficient stereo amplifier is available with 18-7/8 x 3-7/16 x 17-15/16 inches in size and 26.5 lbs weight. For the brilliant functioning the system suggests 1600W energy. The power consumption of the product in the idle state is 25 Watt and the operational power consumption is 320 Watt. Sufficient voltage about USA/120V 60Hz improves the working of the system. The dual variable speed fan and single variable speed fan has the ability to keep the product cool for the proper functioning. The other supported features which improve the performance of the device are DC detection, thermal protection and current limiting.
Load protection is possible in this amplifier. Power switch is included in the product for switch on or off muting. The indicators with green colour for power, red for protection, red for temperature, yellow for YS processing and 2 greens for signal allows the user to know the different conditions of the device. The output connection given to the product is SPEAKON with 5 way binding post and 1/4in. phone. The supported input connector is XLR-3-31 type/ch with 1/4inch.
The front panel of the amplifier is decorated with Power switch and 2 attenuators. The real panel is consist with Mode switch, 2 filter switch, 2 frequency control and Yamaha speaker processing switch. The other feature which supports the device is +3dB sensitivity at 8 ohms. The possible voltage gain by the amplifier is about 32.1 dB. The required input impedance of the Yamaha P Series P2500S Stereo Amplifier is 30kOhms for balanced and 15kOhms for unbalanced.
| General Information | |
|---|---|
| Brand | Yamaha |
| Model | Yamaha P Series P2500S Amplifier |
| Weight | 26.5 lbs |
| Dimensions | 18-7/8 in. x 3-7/16 in. x 17-15/16 in. |
| Type of Amplifier | Stereo amplifier |
| Impedance in ohms | 30kOhms for balanced and 15kOhms for unbalanced. |
| Total Harmonic distortion | 1% |
| Wattage | 1600W |
| Signal to noise ratio | 100 dB |
| Sound System | Speaker |
Related posts: